[Golist] [Fuselist] Using Fuse? + off topic

Fri Apr 4 18:51:32 PDT 2008

Yeah so, the way it's coming out is that I am giving a bit of a  
retrospective history of Fuse with a high level overview of what  
features I found valuable, then I'll be spending the second half or  
2/3rds on Go.
- moses

On Apr 2, 2008, at 6:30 AM, Karsten Goetz wrote:

> Hi Moses, Romuald, everyone,
>
> Romuald, a good post  from my point of view :-)
>
> I'm in a simular situation at this moment. I still have AS2 projects  
> I'm using Fuse or Tweener. In AS3 projects I used Tweener and I just  
> started a project  using
> Go with some own LinearGo-Extentions. Using Go is new and I still  
> have to find out how it fits in my workflow - switch to AS3 changes  
> the workflow, too.
> When I use AS2 kits It often comes to a point that I miss something  
> and it is difficult to extend by myself.
> Most of the time I need a small kit with the basic moviclip  
> manipulations, sometimes I need complex sequencing or some special  
> tweens.
> So it can mix up in using  motionkits and own solutions in the  
> projects .
>
> What would I like to read in the chapter?
> For me it would be interessting to see the experience, problems and  
> solutions of AS2 kits discussed:
> performance, event handling,  interactive animation, sequencing,   
> special effects, organisation of animation code...what else...
> And I would find it very interessting to get this in relationship to  
> as3 concepts and Go. It's a bit about past , future and of cause  
> where we are right now.
> Ja, and all comes with examples, too. In one Chapter ;-)
>
> So far. Lot's of greetings!
>
> Karsten
>
>
>
>
>
>
>
> Am 01.04.2008 um 19:25 schrieb Romuald Quantin:
>> Hi Moses and everyone,
>>
>> * Do you use AS2 + Fuse in your work?
>>
>> I used both a lot for almost all my as2 projects.
>>
>> * How much are you using AS3? If not at all, do you plan to start?
>>
>> I now use as3 almost all the time
>>
>> * You get the Open Source Flash book... it has a tweening chapter by
>> Moses...
>>
>> Using Fuse I'm really interested as I'm already using it, might be  
>> nice for
>> the developers who wants to learn it.
>> Using Go, yes definitely. If I look at the benchmarks, I'd like to  
>> use Go.
>> Which I'm not using, I explain below if you're interested.
>> Using others Tween kits, definitely yes as well, especially for  
>> physics
>> engine and learn what are the difference between all the kits. For  
>> example,
>> if you need a tweener very small for a banner or whatever, it is  
>> good to
>> know What is TweenerLite. Then, have a good overview from a  
>> specialist will
>> be very interesting.
>>
>> So, off topic, I'm not using Go yet. I loved Fuse though and I'd  
>> like to use
>> implements Go in my projects.
>> I'm not using Go because:
>>
>> - I don't have time, probably neither the skills, to write a good  
>> parser as
>> some could do, as good as Fuse has been in as2.
>>
>> - I had a small issue, comparing in a file Tweener and Go. Not  
>> really Go
>> only, as I used the Hydrotween parser (as I don't have time to  
>> write one
>> :)).
>> I included the files, swf and as. If you roll over and out the  
>> picture
>> quickly, before the tween is done (basically to test the reactivity  
>> of the
>> engine), you'll see that the Tweener movement is smoother than Go +
>> Hydrotween.
>> Is there something wrong in the Go engine? In Hydrotween? In my  
>> code? Well,
>> I'm using Tweener until I get an effective parser, maybe Fuse 3?
>>
>> - I followed the first tutorial, but I couldn't follow the second  
>> one where
>> you show how to build a Fuse like parser as it seems I missed a  
>> part of the
>> video in the first quarter?
>>
>> Those are probably good and bad reasons, well they are mine, I hope  
>> it is
>> helping you to make Go accessible and well known.
>>
>> Romuald
>> Thoughtomatic
>>
>>
>>
>> -----Original Message-----
>> From: fuselist-bounces at mosessupposes.com
>> [mailto:fuselist-bounces at mosessupposes.com] On Behalf Of Moses  
>> Gunesch
>> Sent: 01 April 2008 17:53
>> To: fuselist at mosessupposes.com
>> Subject: [Fuselist] Using Fuse?
>>
>> Hi, I am writing a chapter on Fuse + GoASAP, for a book on Open  
>> Source
>> Flash.
>> I'd really like to get your opinions on these topics. So don't lurk,
>> post a reply! :-)
>>
>> * Do you use AS2 + Fuse in your work?
>> * How much are you using AS3? If not at all, do you plan to start?
>>
>> * You get the Open Source Flash book... it has a tweening chapter by
>> Moses...
>>     What do you hope it covers?
>> 	- Using Fuse (programming guide)
>> 	- Using GoASAP (programming guide)
>> 	- Using Tween Kits (general): Fuse, Tweener, Go, Physics engines,
>> etc.
>>
>>
>> PLEASE REPLY! ! !
>> If you don't want to reply to the list, feel free to send me an email
>> off list.
>>
>> Cool, thanks!  :-)
>> Moses
>>
>> + + + + +
>> I USE FUSE
>> Membership options, search archives and more:
>> http://mosessupposes.com/mailman/listinfo/fuselist_mosessupposes.com
>> + + + +  
>> +<index.swf><Main.as>_______________________________________________
>> GoList mailing list
>> GoList at goasap.org
>> http://goasap.org/mailman/listinfo/golist_goasap.org
>
> ------------------------
> Karsten Goetz
> Flashprogrammierung
>
> Bernstorffstr. 120
> 22767 Hamburg
>
> Tel:       +49 40 43 09 91 07
> Mobil:   0173 57 14 984
>
>
>
> _______________________________________________
> GoList mailing list
> GoList at goasap.org
> http://goasap.org/mailman/listinfo/golist_goasap.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://goasap.org/pipermail/golist_goasap.org/attachments/20080404/84c0028f/attachment-0001.html 